| Ferro
Finishing
was started in 1968 by Reg Nolde, in Sydney, Australia, as a manufacturer
of supplies to the metal finishing industry. Ferro Finishing has
since expanded into a well-respected and successful family business
manufacturing polishes for the surface improvement of metals, lacquers,
automotive paints, plastics, fibreglass, natural stones, ceramics,
wood and imitation marble.
Ferro
expanded to the USA as Ferro Surface Technology in 2008, and into
Shanghai, China with a manufacturing facility as Ferro Shuo
Polishing and Grinding Materials in 2007.
Ferro
exports approximately 60% of its polishes to Hong Kong, China, Indonesia,
Singapore, Malaysia, Bangladesh, Thailand and the United Arab Emirates.
Ferro's
polishes give the finishing touch to manufactured articles such
as: |
Where Ferro Finishing polishes are used: Service
and repair industries such as smash repairers,
car detailers, car and truck yards, transport companies, aviation,
military, vintage car and motor bike restorers, musical instrument
restorers, hotels and shopping centres, boat and surfboard restorers
use our polishes.
The
general public uses our
polishes for the maintenance of cars, recreational vehicles, motor
bikes, cutlery, brassware, jewellery, taps, nameplates, balustrading,
door locks, chrome plated appliances, kitchen sinks and other household
surfaces.
Manufacturing
industries such as flatware, kitchenware,
jewellery, watchmaking, automotive, architectural fittings, tap
ware, balustrading, and assorted stainless steel fabricators use
Ferro polishes.
Legal
Statement Product
Disclaimer
|
SAFETY INFORMATION: These
product (and any recommended thinners) contains solvents
and/or other chemical ingredients. Adequate health and safety
precautions should be observed during storage, handling,
application and curing. Keep away from sparks, heat and open
flame and use necessary safety equipment such as air mask,
non-sparking tools and ladders, etc. When working in tanks,
rooms and other enclosed spaces, adequate ventilation must be
provided. Keep out of reach of children.
WARRANTY & LIMITATION OF
SELLER'S LIABILITY: Ferro Surface Technology, warrants only
its products represented herein meet the formulation standards
of Ferro Surface Technology LLC.
THE WARRANTY DESCRIBED IN THE
ABOVE PARAGRAPH SHALL BE IN LIEU OF ANY OTHER WARRANTY,
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE
DESCRIPTION ON THE FACE HEREOF.
The buyer's sole and exclusive
remedy against Ferro Surface Technology LLC shall be for
replacement of the product or refund of the purchase price in
the event that a defective condition of the product should be
found to exist. NO OTHER REMEDY (INCLUDING BUT NOT LIMITED TO,
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST
SALES, INJURY TO PERSON OR PROPERTY, OR ANY OTHER INCIDENTAL
OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO THE BUYER. The
sole purpose of this exclusive remedy shall be to provide
buyer with replacement of the product or refund of the
purchase price of the product if any defect in materials is
found to exist. This exclusive remedy shall not be deemed to
have failed its essential purpose so long as Ferro Surface
Technology LLC is willing and able to replace the defective
materials or refund the purchase price.
Technical and application
information herein is provided for the purpose of establishing
a general profile of the coating and proper coating
application procedures. Test performance results were obtained
in a controlled environment and Ferro Surface Technology LLC
makes no claim that these tests or any other tests, accurately
represent all environments. As application, environmental and
design factors can vary significantly, due care should be
exercised in the selection and use of the products.
|
|
